-Powerful rare-earth magnets hold your device securely in place even on the bumpiest roads.
-Magic mount works with virtually any smartphone, GPS, tablet (up to 8-inch ) or music player.
-Just hover your device near the magnetic surface and it instantly locks securely in place.

Waste no time and experience zero hassle keeping your devices charged with the durable and highly dependable OtterBox Lightning to USB-A charging cables. These cables are thoughtfully designed with industry-leading mobile expertise and proven quality for dependable use to satisfy every charging need.

Durable, trusted and built to last
Bend/flex-tested 3,000 times for dependable use
Flexible exterior cord coating for quality feel and finish
Designed to work flawlessly with your favorite OtterBox cases and accessories
Limited lifetime warranty and no hassle customer service

Connector Type: Lightning to USB-A
Cable Specification: MFi
Current Capacity: 3 AMPS
Data Rate: 480 Mbps
Weight:

2 meter: 0.13-lb | 58.00-g

Switch it up, swap it out and express your style with an Otter + Pop Symmetry Series case — the slim and protective case integrated with a PopSockets® PopGrip™. Additionally, a silver-based antimicrobial additive is integrated into the case that helps inhibit microbial growth and defends the case exterior against many common bacteria. Choose from a fun variety of colors and patterns that are easy to remove and install so you can change up your look in a flash.

MATERIALS
Polycarbonate
Synthetic rubber

DROP+ | 3X as many drops as military standard (MIL-STD-810G 516.6)
Case is infused with silver-based additive that continually blocks microbial growth
Made with 50% recycled plastic*
Lasting antimicrobial technology helps protect case exterior against many common bacteria**
PopSockets PopGrip is integrated into the case for a slim look that slips easily into pockets
PopTop designs are easy to switch out — just close flat, press down and turn to swap the PopTop
Wireless charging compatible (may need to remove PopTop)
PopSockets case by OtterBox with a one-piece design for easy on/off
PopSockets PopGrip helps you text one-handed, snap better pics and watch videos hands-free
Durable protection shields against drops, bumps and fumbles
Raised edges protect camera and screen
Compatible with PopSockets PopTop, PopSockets Car Vent Mount and PopSockets Multi-Surface Mount
Pair with an OtterBox screen protector for total, 360-degree phone protection

*PopTop is not made from recycled materials.

**It does not protect you or the screen.

From the gym to the office to wherever—our premium soft-touch silicone straps provide all-day comfort complete with a fun and elevated DOT textured design. Let your sleek, U statement pieces do the talking.

Matte gunmetal clasp for comfortable all-day wear
Textured micro-dot design & debossed logo detail
Antimicrobial, soft touch silicone

DESIGN: Perfect place to store your AirPods while you work out or when you run out of battery.

DURABLE HOLDER: Hold your AirPods securely. Keep your AirPods close at all times!

MATERIAL: Made from non-toxic silicone that is harmless to the human body; silicone is usually used to create medical devices and baby bottles.

COMPATIBLE: Compatible with Apple Watch.

DISCLAIMER: AirPods and smart watches are not included.

HANDLstick Handle
Experience the freedom of the HANDLstick phone grip and stand. Pair with any device for a sleek, patented elastic brace system. Clip into portrait mode with the multifunctional kickstand then flip to landscape mode.

The HANDLstick phone grip and stand attaches directly to the back of your existing smartphone case or phone. No need to switch cases.

Pairs with any smartphone device
Patented elastic brace system slips through fingers for a secure, effortless grip
Multi-functional kickstand flips between landscape or portrait mode
Compatible with most wireless chargers

How to Apply and Use HANDL
Learn how to apply your HANDLstick to your phone or case. Complete with step by step instructions and helpful tips to ensure your HANDLstick is securely attached. Plus, how to use the grip in various ways and clip into stand mode.

Step 1: Find your stick alignment guide on the inside of your HANDL package.

Step 2: Using the helpful gridlines align the bottom of the guide to the bottom back of your phone

Step 3: Peel off the back of the HANDLstick and with the logo at the top, adhere to the back of your phone or case using the guide

Step 4: Apply firm pressure for 30-45 seconds to ensure the HANDL is secure

MATERIALS
Polycarbonate
Synthetic rubber

FEATURES
Thin profile slips easily into tight pockets
Durable protection shields against drops, bumps and fumbles
Raised edges protect camera and touchscreen
One-piece design pops on and off your phone in a flash
Works with 5G, 4G and all other standard networks
DROP+ | 3X as many drops as military standard (MIL-STD-810G 516.6)
Hassle-free customer service

COMPATIBILITY
iPhone 12 Pro Max

ELAGO IS PAVING THE WAY FOR new accessories compatible with MagSafe! One of the first designs to be CREATED FROM SCRATCH is the MS Grip - the PERFECT ADDITION TO YOUR DESKTOP, NIGHTSTAND, OR COUNTER! Great for personal use or a gift for any user of a mobile phone that is compatible with MagSafe.

AFTER AN EASY INSTALLATION PROCESS, THE MS Grip HOLDS your phone compatible with MagSafe and charges it. The Grip was designed to allow MULTIPLE FUNCTIONAL USES - including as a STAND or inserting your fingers through the loop to HOLD IN YOUR HAND.

PREMIUM SILICONE WAS USED TO create this awesome product so that it can help protect your phone and the surface it sits on. Silicone PREVENTS SCRATCHES on the surface it rests on and KEEPS IT SECURELY THERE with amazing grip.

ORGANIZE THE CABLE CLUTTER WITH designed cable cutouts; simply pull the cables through the designated space to HELP KEEP YOUR AREAS CLEAN AND TIDY! (Compatible with MagSafe Charger, but is not included).

elago is a DESIGN COMPANY FIRST AND FOREMOST. Our motto is SIMPLE SOPHISTICATION because we create products that are USEFUL AND AWESOME! WE ALWAYS CREATE products that WE OURSELVES USE, so we know YOU WILL LOVE IT!

Confidently wrap your wrist with Band for Apple Watch. Made of a durable, soft touch, silicone material, the Apple Watch wrist band is comfortable, sweatproof and breathable for daily activity and even an intense gym workout. Intentional design complements your Apple Watch with the all-day comfort and style.

FEATURES
Comfortable all-day style
Durable, soft touch, silicone material
Sport/athletic styling
Sweatproof, breathable
Antimicrobial*
Quality buckle, lug and clasp
Complements Apple Watch features and functions

*Helps protect band exterior against many common bacteria. It does not protect you or the watch.
COMPATIBILITY
Apple Watch Series 7 45mm
Apple Watch Series 6 44mm
Apple Watch Series SE 44mm
Apple Watch Series 5 44mm
Apple Watch Series 4 44mm
Apple Watch Series 3 42mm

Learning, playing and connecting on the go /
Mobile gadgets for younger tech users need kid-specific protection. When teaching kids
responsibility and exhibiting trust, we give them tablets and phones. Kids are kids and no matter
how careful they want to be, accidents happen, plus, kids are just different than your average tech
user. Ensure kids’ tech is ready for anything with OtterBox Kids EasyGrab Tablet Case for iPad.
Known for legendary protection, OtterBox designed EasyGrab Tablet Case especially for small
hands. Made to prevail over tumbles. The case is designed for easy and frequent cleaning and
sanitization. Included with EasyGrab Tablet Case is the innovative EasyGrab Multi-Use Case Stand
designed for secure car travel, multiple hands-free viewing angles and convenient carrying on the
go. Help kids grow their minds, grow their confidence and make the most of their iPads with
OtterBox Kids EasyGrab Tablet Case. We’ve developed a 360° design approach just for kids.
OtterBox Kids EasyGrab Tablet Case, OtterBox Kids Power and Audio Connector Cables and
OtterBox Kids Blue Light Guard Glass Screen Protector work together seamlessly giving your kids an
unprecedented set of tools designed specifically for how they stay connected. Give your kids
independence and enhance their tablet experience with OtterBox Kids accessories.

Features /
• Durable construction for exuberant users that’s tested and proven to outlast heavy-duty use
• Grip ridges designed for easy hold by growing hands
• Rugged protection withstands drops, throws and falls from tables and countertops
• Case is infused with silver-based additive that continually blocks microbial growth
• Clean crumbs, sticky snacks and grime easily, case withstands frequent use of cleaning and
sanitizing wipes
• Fun colors that kids love and parents approve — the perfect intersection of kid and parent
aesthetics
• Raised edges protect camera and screen
• Proven protection that gives kids confidence and convenience to carry on the go
• Innovative EasyGrab Multi-Use Case Stand included
• Hands-free — flexible stand adjusts to multiple viewing angles
• Travel — stand attaches to car headrest posts and holds tablet securely
• Convenient carry — built-in handle fits small hands for grab-and-go convenience
• 360° design approach — compatible with OtterBox cases, screen protectors and power
accessories
• Hassle-free customer service

HANDLstick Handle
Experience the freedom of the HANDLstick phone grip and stand. Pair with any device for a sleek, patented elastic brace system. Clip into portrait mode with the multifunctional kickstand then flip to landscape mode.

The HANDLstick phone grip and stand attaches directly to the back of your existing smartphone case or phone. No need to switch cases.

Pairs with any smartphone device
Patented elastic brace system slips through fingers for a secure, effortless grip
Multi-functional kickstand flips between landscape or portrait mode
Compatible with most wireless chargers

How to Apply and Use HANDL
Learn how to apply your HANDLstick to your phone or case. Complete with step by step instructions and helpful tips to ensure your HANDLstick is securely attached. Plus, how to use the grip in various ways and clip into stand mode.

Step 1: Find your stick alignment guide on the inside of your HANDL package.

Step 2: Using the helpful gridlines align the bottom of the guide to the bottom back of your phone

Step 3: Peel off the back of the HANDLstick and with the logo at the top, adhere to the back of your phone or case using the guide

Step 4: Apply firm pressure for 30-45 seconds to ensure the HANDL is secure

QUALITY YOU KNOW AND TRUST WITH elago. UNLIKE OTHER GENERIC CASES THAT are mass produced, all of our cases are designed IN HOUSE FROM SCRATCH. From a concept, all the way to a finished product, every aspect of creating a product is done in-house to ensure that you get a case that WILL FIT PERFECTLY, HELP PROTECT FROM DROPS, AND LOOKS GREAT – SAVING YOU TIME AND MONEY!

THE PERFECT MINIMALISTIC CASE FOR owners that want the design to SHINE THROUGH! The clear case offers BASIC PROTECTION FROM EVERYDAY USE - including dirt, oils, and basic drops.

NO NEED TO WORRY ABOUT SMUDGES WITH our innovative MICRO DOT PATTERN. The pattern helps in REDUCING THE YELLOWING EFFECT keeping the case CLEANER FOR LONGER!

PERFECT GIFT FOR any audio lover! Great for BIRTHDAY PRESENTS for loved ones and gifts during the holiday season – ESPECIALLY CHRISTMAS FOR STOCKING STUFFERS!

elago is a DESIGN COMPANY FIRST AND FOREMOST. Our motto is SIMPLE SOPHISTICATION because we create products that are USEFUL AND AWESOME! WE ALWAYS CREATE products that WE OURSELVES USE, so we know YOU WILL LOVE IT!

About this item
Designed for seamless interaction with MagSafe technology, for best experience and protection, attach to an OtterBox for MagSafe case*
Strong magnetic alignment and attachment, attaches to vertical and horizontal vents
Adjusts easily for optimal viewing and access, holds phone securely in landscape and portrait positions
Simple, convenient connection
Limited lifetime warranty and hassle-free customer experience

Fits series 1-3 - Size 38Series 4-6 & Apple Watch SE Size 40//BUILT FOR YOU TOGO FURTHER

1//HIGH STRENGTH RPET NYLON
CERTIFIED 100% RECYCLED WATER BOTTLES

2//RECYCLED WOVEN LABELCERTIFIED 100% RECYCLED POLYESTER

3//RECYCLABLE STAINLESS STEEL

4//SUSTAINABLE PACKAGING


HARDWARERETAIL PACKAGE PRODUCT SPECIFICATIONSLENGTHWEIGHTWIDTHDEPTHDESIGNED FOR

BUILT FOR YOU TOGO FURTHER

Learning, playing and connecting on the go /
Mobile gadgets for younger tech users need kid-specific protection. When teaching kids
responsibility and exhibiting trust, we give them tablets and phones. Kids are kids and no matter
how careful they want to be, accidents happen, plus, kids are just different than your average tech
user. Ensure kids’ tech is ready for anything with OtterBox Kids EasyGrab Tablet Case for iPad.
Known for legendary protection, OtterBox designed EasyGrab Tablet Case especially for small
hands. Made to prevail over tumbles. The case is designed for easy and frequent cleaning and
sanitization. Included with EasyGrab Tablet Case is the innovative EasyGrab Multi-Use Case Stand
designed for secure car travel, multiple hands-free viewing angles and convenient carrying on the
go. Help kids grow their minds, grow their confidence and make the most of their iPads with
OtterBox Kids EasyGrab Tablet Case. We’ve developed a 360° design approach just for kids.
Give your kids independence and enhance their tablet experience with OtterBox Kids accessories.

Features
• Durable construction for exuberant users that’s tested and proven to outlast heavy-duty use
• Grip ridges designed for easy hold by growing hands
• Rugged protection withstands drops, throws and falls from tables and countertops
• Case is infused with silver-based additive that continually blocks microbial growth
• Clean crumbs, sticky snacks and grime easily, case withstands frequent use of cleaning and
sanitizing wipes
• Fun colors that kids love and parents approve — the perfect intersection of kid and parent
aesthetics
• Raised edges protect camera and screen
• Proven protection that gives kids confidence and convenience to carry on the go
• Innovative EasyGrab Multi-Use Case Stand included
• Hands-free — flexible stand adjusts to multiple viewing angles
• Travel — stand attaches to car headrest posts and holds tablet securely
• Convenient carry — built-in handle fits small hands for grab-and-go convenience
• 360° design approach — compatible with OtterBox cases, screen protectors and power
accessories

Confidently wrap your wrist with Band for Apple Watch. Made of a durable, soft touch, silicone material, the Apple Watch wrist band is comfortable, sweatproof and breathable for daily activity and even an intense gym workout. Intentional design complements your Apple Watch with the all-day comfort and style.

Comfortable all-day style
Durable, soft touch, silicone material
Sport/athletic styling
Sweatproof, breathable
Antimicrobial*
Quality buckle, lug and clasp
Complements Apple Watch features and functions

*Helps protect band exterior against many common bacteria. It does not protect you or the watch.

HANDLstick Handle
Experience the freedom of the HANDLstick phone grip and stand. Pair with any device for a sleek, patented elastic brace system. Clip into portrait mode with the multifunctional kickstand then flip to landscape mode.

The HANDLstick phone grip and stand attaches directly to the back of your existing smartphone case or phone. No need to switch cases.

Pairs with any smartphone device
Patented elastic brace system slips through fingers for a secure, effortless grip
Multi-functional kickstand flips between landscape or portrait mode
Compatible with most wireless chargers

How to Apply and Use HANDL
Learn how to apply your HANDLstick to your phone or case. Complete with step by step instructions and helpful tips to ensure your HANDLstick is securely attached. Plus, how to use the grip in various ways and clip into stand mode.

Step 1: Find your stick alignment guide on the inside of your HANDL package.

Step 2: Using the helpful gridlines align the bottom of the guide to the bottom back of your phone

Step 3: Peel off the back of the HANDLstick and with the logo at the top, adhere to the back of your phone or case using the guide

Step 4: Apply firm pressure for 30-45 seconds to ensure the HANDL is secure

UNLIKE OTHER GENERIC CASES THAT are mass produced, all of our cases are designed IN HOUSE FROM SCRATCH. From a concept, all the way to a finished product, every aspect of creating a product is done in-house to ensure that you get a case that WILL FIT PERFECTLY, HELP PROTECT FROM DROPS, AND LOOKS GREAT – SAVING YOU TIME AND MONEY!

ARMOR DESIGN HELPS PROTECT YOUR charging case by providing INCREDIBLE DROP PROTECTION! PROTECT your device WITHOUT THE BULK and have ACCESS TO ALL FUNCTIONS of your charging case - like WIRELESS CHARGING.

PREMIUM SILICONE MATERIAL PROTECTS YOUR charging case from everday use, including DIRT, OIL, SCRATCHES AND DROPS. Silicone also provides GREAT GRIP and a SLIM PROFILE, allowing it to FIT IN YOUR POCKET! Carabiner is INCLUDED so that you can HANG the case from your backpack, purse, pants, etc.

PERFECT GIFT FOR anyone using the new device! Great for BIRTHDAY PRESENTS for loved ones and gifts during the holiday season – ESPECIALLY CHRISTMAS FOR STOCKING STUFFERS!

elago is a DESIGN COMPANY FIRST AND FOREMOST. Our motto is SIMPLE SOPHISTICATION because we create products that are USEFUL AND AWESOME! WE ALWAYS CREATE products that WE OURSELVES USE, so we know YOU WILL LOVE IT!