Applied Filters

Device

Brands

Category

Device Compatibility iPhone SE (2nd gen)
iPhone 8
iPhone 7
iPhone 6s
Proofs DropProof
Features Sustainably made from over 85% ocean-based recycled plastic
Mellow wave pattern
Ultra-thin, one-piece design
Dimensions 5.65" x 2.92" x 0.44" / 143.5mm x 74.2mm x 11.2mm
Weight .73 oz / 20.76 g
Drop Height 6.6 feet / 2 meters
9.000 KD 9.0 KWD
Buy 1 Get 1 Free
DESCRIPTION:
Enhanced minimalism. Layer the simple design of your iPhone with a form-fitting ribbed texture for essential everyday protection in sleek style. As with all our cases, Clic View is compatible with wireless charging.

ELEVATE THE BASICS
Designed with a minimalistic transparent finish to enhance your phone's design without overshadowing it.

RIBBED TEXTURE
Elevated with a simple slash pattern to add a unique touch to your everyday carry.

FORM-FITTING PROTECTION
Simple, lightweight design provides everyday protection for your phone without the bulk.

GO WIRELESS
Make life more convenient – all our iPhone cases are compatible with wireless chargers.
10.500 KD 10.5 KWD
Sale 50% Off
Around the neck or across the body, this smartphone case ensures your hands are free at all times

You can adjust the length of the strap and quickly remove or replace it thanks to the easy to use bayonet clasp

Extra straps are available separately in a range of colors and materials

Convenient card slot on the back of the protective case

The color of the protective case will not fade or discolor

7.500 KD 3.750 KD 3.75 KWD
【Liquid Silicone Material】 The elago iPhone XI Case is made from a liquid silicone material that gives it a nice, soft feeling. Anti-fingerprints and dirt resistance features keep your iPhone looking clean all the time. Easily wipe off dust and dirt from the case.

【Three-Tier Structure】 elago Silicone Case has a three-tier structure: liquid silicone, hard PC and soft microfiber lining. A soft microfiber lining inside the case will prevent scratches and helps protect your iPhone.

【Full Body Protection】 The case covers the whole phone - including the bottom and buttons. Precise engineering allows full access to all buttons without any interruption.

【Screen and Camera Protection】 The raised lips help protect the screen and camera against scratches from direct surface contact.

【Installation Guide】 Place the top part of device into the case and snap on the remaining bottom section (TOP – Hard PC, BOTTOM – Liquid Silicone)
6.500 KD 6.5 KWD
Switch it up, swap it out and express your style with Otter + Pop Symmetry Series cases — the slim and protective case integrated with a PopSockets® PopGrip™. Choose from a fun variety of colors and patterns that are easy to remove and install so you can change up your look in a flash.

MATERIALS:
Synthetic rubber
Polycarbonate

FEATURES:
PopSockets PopGrip is integrated into the case for a slim look that slips easily into pockets
PopTop designs are easy to switch out — just close flat, press down and turn to swap the PopTop
Works with Qi wireless charging (may need to remove PopTop)
Cute PopSockets case by OtterBox with a one-piece design for easy on/off
PopSockets PopGrip helps you text one-handed, snap better pics and watch videos hands-free
Compatible with PopSockets PopTops, PopSockets Car Vent Mount and PopSockets Multi-Surface Mount
Pair with an OtterBox Amplify screen protector for total, 360-degree phone protection
13.500 KD 13.5 KWD
Symmetry Series Clear is the perfect choice when you have nothing to hide. Display your iPhone’s iconic design and showcase your unmistakably unapologetic personality with a clear iPhone case that radiates authenticity.

MATERIALS:
Synthetic rubber
Polycarbonate

FEATURES:
Ultra-slim profile with a clear design showcases your iPhone and your style
Precision design ensures buttons and mute switch work just like you expect them to
Drop protection keeps your phone safe without sacrificing your style
Raised screen bumper helps protect the screen
Pair with an OtterBox Amplify screen protector for total, 360-degree phone protection
12.000 KD 12.0 KWD
High quality/high strength tempered glass manufactured in Japan

9H hardness for superior scratch resistance

Oleophobic anti-fingerprint coating

Ultra thin (0.2mm)

Compatible with iPhone XR and iPhone 11 (6.1-inch)
7.500 KD 7.5 KWD
Clearance Sale
iPhone XR case out of natural cork, a combination of Scandinavian minimalism and nature's own design.

Durable, sturdy and resilient to scratches
Hypoallergenic
Supports wireless charging
Handcrafted
Super slim design
7.500 KD 1.000 KD 1.0 KWD
Evutec Case Compatible with iPhone Xr , Northill Series Premium Leather+TPU Shock Proof Interior Protective Durable Stylish-Blue/Saddle (AFIX+ Vent Mount Included)

Model # NH-90P-MT-D03

Our Northill case for Apple iPhone XR is unique because of its special combination of fabric and leather. The premium leather adds a smooth texture and more protection to the phone case. This mobile phone cover is not slim but hard, protective and shockproof. This heavy-duty case has metal insert compatible with our magnetic vent mount, which will transfer your phone into a hands-free, transit-friendly tool.

[Genuine Leather & Anti Scratch Fabric] We have selected premium leather and fabric to build the exterior of the case. The leather is stylish, protective and soft to the touch. The fabric is anti-scratch and provides a good grip.

[Drop Protection] Our case provides the phone with strong protection. The case itself is military grade drop tested. It provides a good amount of protection without adding bulkiness.

[Wireless Charging Compatibility] Due to the position of the metal inserts, the case will work with all wireless chargers. These inserts do not block the charging thus, will not take the charge energy away or heat up when wireless charging. Our case also will not interfere with WIFI, cellular, GPS, or Bluetooth signal.

[Magnetic Vent Mount] There are metal inserts in the phone case, which will hold strongly to the magnetic vent mount that comes with the case. Our magnetic vent mount will turn your phone into a hands-free, transit-friendly tool.

AFIX+ Car Vent Mount Included

Military-Grade Drop Protection

Quality Leather

Scratch Resistant Fabric

Wireless Charging Compatibility - Allows Wireless Charging Function
3.000 KD 3.0 KWD
Evutec Case Compatible with iPhone XR, Aramid Fiber Karbon Strong Protective Slim (1.6mm) Durable Phone Case (Black)-AFIX+ Vent Mount Included

Manufacture Par Number: AP-90P-MT-K01

Our Karbon case for Apple iPhone XR is unique because of its special material-aramid fiber. Aramid fiber, similar to carbon fiber but does not intervene signals, adds a smooth texture and more protection to the phone case. This mobile phone cover is not only slim but also hard, protective and shockproof. This heavy-duty case has metal insert compatible with our magnetic vent mount, which will transfer your phone into a hands-free, transit-friendly tool.

【5X Steel Strength】 The advanced composite material (Aramid Fiber) we use to build the case is 5 times as strong as steel of the same weight. This material is commonly used in armor (bulletproof vest), spacecraft, jet engines and race cars.

【Slim & Protective】 While the case is only 1.6mm thin and lightweight, our Karbon case is also very protective. The case itself is military grade drop tested. It provides a good amount of protection without adding bulkiness.

【Wireless Charging Compatibility】 Due to the position of the metal inserts, the case will work with all wireless chargers. These inserts do not block the charging thus, will not take the charge energy away or heat up when wireless charging. Our case also will not interfere with WIFI, cellular, GPS, or Bluetooth signal.

【Magnetic Vent Mount】 There are metal inserts in the phone case, which will hold strongly to the magnetic vent mount that comes with the case. Our magnetic vent mount will turn your phone into a hands-free, transit-friendly tool.

REAL MATERIAL EXTERIOR - Real Advanced Composite Material (ACM)

SLIM PROFILE - 1.6 mm thin

WIRELESS CHARGING COMPATIBILITY - Allows wireless charging function fully as designed

TACTILE BUTTONS - Reduce resistants caused by TPU, provide better operations on all devices

EVUSOF+ - This new proprietary material allows for better shock absorption while maintaining color and structural integrity
5.000 KD 5.0 KWD
Armor shell and impact resistant soft core

Feather-light composite construction

Oversized tactile buttons

Easy access to touchscreen and ports

Scratch resistant skid pads and screen surround

Apple Pay compatible

Wireless charging compatible

Meets military drop-test standards (MIL STD 810G 516.6)

Compatible with iPhone XR (6.1-inch)
5.000 KD 5.0 KWD
The Monarch Series iPhone XR (6.1-inch) case encompasses a premium design & precise engineering to provide a case that meets double the Military Standard for drop & shock protection.

Handcrafted, featherlight construction with 5 layers of protection

Top grain leather and alloy metal hardware

Soft impact-resistant core & honeycomb traction grip

Oversized tactile buttons & protective screen surround

Apple Pay compatible

Wireless charging compatible

Meets 2X Military drop-test standards (MIL STD 810G 516.6)
9.000 KD 9.0 KWD
Armor shell and impact resistant soft core

Feather-light composite construction

Oversized tactile buttons & easy access to touchscreen and ports

Scratch resistant skid pads and screen surround

Apple Pay compatible

Wireless charging compatible

Meets military drop-test standards (MIL STD 810G 516.6)

Compatible with iPhone XR (6.1-inch)
5.000 KD 5.0 KWD
Armor shell and impact resistant soft core

Feather-light composite construction

Oversized tactile buttons & easy access to touchscreen and ports

Scratch resistant skid pads and screen surround

Apple Pay compatible

Wireless charging compatible

Meets military drop-test standards (MIL STD 810G 516.6)

Compatible with iPhone XR (6.1-inch)
6.500 KD 6.5 KWD
Every fall is a little fun when you tumble through life with SLAM, the only LifeProof dedicated to the drop.

DROPPROOF

12.000 KD 12.0 KWD
Strada Series Folio for iPhone XR is functional fashion. The folio cover protects the screen and includes a vertical slot for a card or cash. Premium protection paired with traditional handcrafted style has produced a timeless, leather iPhone XR case made to impress.

MATERIALS:
Premium leather

Metal latch

Polycarbonate shell

FEATURES:
Elegance plus protection: leather portfolio backed with OtterBox Certified Drop+ Protection

Refined style: premium leather design looks great and improves with age

Folio cover: wraps around to protect the touchscreen and locks in place with a polished magnetic latch

Functional: convenient vertical card slot for cash or a card
3.000 KD 3.0 KWD
Show off iPhone XR with the slim profile of Symmetry Series Clear. Fortified with drop protection and easy to install, you can accessorize any look with the clear iPhone XR case designed to highlight your style.

MATERIALS:
Synthetic rubber

Polycarbonate

FEATURES:
Ultra-slim: sleek, clear profile showcases your iPhone XR and your style

Precision design: buttons and mute switch work just like you expect them to

Drop protection: keeps your phone safe without sacrificing style

Screen bumper: raised, beveled edge helps protect the screen
6.000 KD 6.0 KWD
Evutec Case Compatible with iPhone Xr , Ballistic Nylon Premium Protective Military Grade Drop Tested Shockproof Phone Case with AFIX+ Vent Mount-Red

Our ballistic nylon case for Apple iPhone XR is unique because of its special material-ballistic nylon, which adds special texture and more protection to the phone case. This mobile phone cover is not slim but hard, protective and shockproof. This heavy-duty case has metal insert compatible with our magnetic vent mount, which will transfer your phone into a hands-free, transit-friendly tool.

AP-90P-MP-B02

[Ballistic Nylon] The exterior of the case is made of a special kind of material-ballistic nylon. Ballistic nylon is stylish, protective and soft to touch.

[Drop Protection] The case itself is military grade drop tested. It provides a good amount of protection without adding bulkiness. The honeycomb 3D interior also provides additional protection for the phone.

[Wireless Charging Compatibility] Due to the position of the metal inserts, the case will work with all wireless chargers. These inserts do not block the charging thus, will not take the charge energy away or heat up when wireless charging. Our case also will not interfere with WIFI, cellular, GPS, or Bluetooth signal.

[Magnetic Vent Mount] There are metal inserts in the phone case, which will hold strongly to the magnetic vent mount that comes with the case. Our magnetic vent mount will turn your phone into a hands-free, transit-friendly tool.

REAL MATERIAL EXTERIOR - Ballistic Nylon

WIRELESS CHARGING COMPATIBILITY - Allows wireless charging function fully as designed

AFIX+ Magnetic Mounting System - Transform your device into a hands-free, transit-free tool

HONEYCOMB 3D INTERIOR - Additional shock absorption

TACTILE BUTTONS - Reduce resistants caused by TPU, provide better operations on all devices
5.000 KD 5.0 KWD
Feather-light impact resistant core

Soft felt-lined cover for complete 360-degree protection

Water resistant tactile non-slip grip exterior

Credit card storage

Apple Pay compatible

Wireless charging compatible

Easy access to touchscreen and ports

Meets military drop-test standards (MIL STD 810G 516.6)

Compatible with iPhone XR (6.1-inch)
6.000 KD 6.0 KWD
Armor shell & impact resistant soft core
Air-soft corners for cushioning impact
Feather-light composite construction
Oversized tactile buttons & easy access to touchscreen and ports
Scratch resistant skid pads and screen surround
Apple Pay compatible
Wireless charging compatible
Meets military drop-test standards (MIL STD 810G 516.6)
Compatible with iPhone XR (6.1-inch)
5.000 KD 5.0 KWD

©2020 ِAl-Fahad Trading and Industrial. All rights reserved